Engineering
Engineering, 06.05.2021 07:40, daisyyy12

Gasoline vapors are vented to the atmosphere when an underground gasoline storage tank is filled. If the tanker truck discharges into the top of the tank with no vapor control (known as the splash fill

method), the emission of gasoline vapors is estimated to be 2.75 kg/m3 of gasoline delivered to the

tank. If the tank is equipped with a pressure relief valve and interlocking hose connection and the tanker

truck discharges into the bottom of the tank below the surface of the gasoline in the storage tank, the

emission of gasoline vapors is estimated to be 0.095 kg/m3 of gasoline delivered (Wark et al., 1998).

Assume that the service station must refill the tank with 4.00 m3 of gasoline once a week. Draw a massbalance diagram and estimate the annual loss of gasoline vapor (in kg/y) for the splash fill method.

Estimate the value of the fuel that is captured if the vapor control system is used. Assume the density of

the condensed vapors is 0.800 g/mL and the cost of the gasoline is $1.06 per liter.​

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, aaliyah80
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
image
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
image
Engineering, 04.07.2019 18:20, jessie8022
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
image
Engineering, 04.07.2019 19:10, Destinationz
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
Do you know the correct answer?
Gasoline vapors are vented to the atmosphere when an underground gasoline storage tank is filled. If...

Questions in other subjects:

Konu
Mathematics, 04.12.2020 07:30