Engineering, 06.05.2021 04:40, Thelazysandwich

The principal in-plane stresses and associated strains in a plate of material are σ1 = 50 ksi, σ2 = 25 ksi, ε1 = 1050 µ, and ε2 = 195 µ. (a) This is a plane stress state, meaning the principal stress normal to this plane is zero. Is the principal strain ε3 acting normal to this plane also zero? Show why or why not. Draw the 3D Mohr’s circle for both stress and strain states.
(b) Determine the Modulus of Elasticity, E.
(c) Determine Poisson’s ratio, ν.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Do you know the correct answer?

The principal in-plane stresses and associated strains in a plate of material are σ1 = 50 ksi, σ2 =...