A 4-bit A/D converter (0-5V FSR) is used to measure the output voltage from an LVDT. A binary number (1100)2 is returned from the A/D converter. The LVDT has a sensitivity of 0.01V/cm and bias of 0.1V. 1) what is the overall input resolution of the system? 2) what is the possible input displacement to cause this code? 3) what is the overall uncertainty if the converter has nonlinearity error of ±2bits and hysteresis error of ±3bits.

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.