Engineering, 03.05.2021 22:40, gabe7774
The cylindrical portion of a compressed-air tank is fabricated of steel plate that is welded along a helix that makes an angle of 70 with respect to the longitudinal axis of the tank. The inside diameter of the cylinder is 48 in., the wall thickness is 0.5 in., and the internal pressure is 240 psi. Determine the following quantities for the cylindrical portion of the tank: (a) the axial stress a and the hoop stress h, (b) the normal stress and shear stress on planes parallel and perpendicular to the weld, (c) the maximum inplane shear stress, and (d) the absolute maximum shear
Answers: 3
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 12:10, Ryantimes2
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 19:10, nida7864
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
The cylindrical portion of a compressed-air tank is fabricated of steel plate that is welded along a...
Mathematics, 30.04.2021 21:50
Biology, 30.04.2021 21:50
Mathematics, 30.04.2021 21:50
Physics, 30.04.2021 21:50
History, 30.04.2021 21:50