Engineering
Engineering, 30.04.2021 21:00, aleahnew36

Find the current in the 5 Ω resistor. Find the potential at b w. r.t. that at a if the 5 Ω resistor is removed and the terminals a-b are open circuited. The 5 Ω resistor removed from the circuit and the 90 V source is replaced by a 10 Ω resistor. Determine the resistance that will be measured across a-b.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
image
Engineering, 04.07.2019 19:10, pjgolden04
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
image
Engineering, 06.07.2019 03:10, kturvey225
Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window
Answers: 3
image
Engineering, 06.07.2019 04:10, 25linm
Water flows at the rate of 200 i/s upwards through a tapered vertical pipe. the diameter at marks(3) clo5) the bottom is 240 mm and at the top 200 mm and the length is 5m. the pressure at the bottom is 8 bar, and the pressure at the topside is 7.3 bar. determine the head loss through the pipe. express it as a function of exit velocity head.
Answers: 3
Do you know the correct answer?
Find the current in the 5 Ω resistor. Find the potential at b w. r.t. that at a if the 5 Ω resistor...

Questions in other subjects:

Konu
Mathematics, 25.09.2020 08:01