Engineering, 30.04.2021 18:30, 105001964

The new software organization requires a new point of sale and stock control system for their many stores throughout Pakistan to replace their aging mini-based systems. A sales assistant will be able to process an order by entering product numbers and required quantities into the system. The system will display a description, price, and available stock. In-stock products will normally be collected immediately by the customer from the store but may be selected for delivery to the customer's home address for which there will be a charge. If stock is not available, the sales assistant will be able to create a backorder for the product from a regional warehouse. The products will then either be delivered directly from the regional warehouse to the customer's home address, or the store for collection by the customer. The system will allow products to be paid for by cash or credit card. Credit card transactions will be validated via an online card transaction system. The system will produce a receipt. Order details for in-stock products will be printed in the warehouse including the bin reference, quantity, product number, and description. These will be collected by the sales assistant and given to the customer. The sales assistant will be able to make refunds, provided a valid receipt is produced. The sales assistant will also be able to check stock and pricing without creating an order and progress orders that have been created for delivery.
You need to answer the following questions. (Marks 8)
1. Design a detailed Domain model for the Sale and Stock Control system.

2. List down classes and abstract classes in the above system.
3. Give any one scenario of inheritance of classes.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, michellerosas

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

continue

Engineering, 04.07.2019 18:20, xcapo1x

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

continue

Engineering, 04.07.2019 19:10, nida7864

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

continue

Do you know the correct answer?

The new software organization requires a new point of sale and stock control system for their many s...