![Engineering](/tpl/images/cats/User.png)
Engineering, 29.04.2021 20:40, ella3714
In a hydraulic jack, the pipe below the load has an area of 5 m2, and the pipe through which the input force transmits has an area of 0.1 m2. If the input force is 200 N, what is the output force in kN?
![answer](/tpl/images/cats/otvet.png)
Answers: 1
Other questions on the subject: Engineering
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:20, sanchez626
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
Do you know the correct answer?
In a hydraulic jack, the pipe below the load has an area of 5 m2, and the pipe through which the inp...
Questions in other subjects:
![Konu](/tpl/images/cats/biologiya.png)
Biology, 08.12.2021 20:10
![Konu](/tpl/images/cats/en.png)
![Konu](/tpl/images/cats/mat.png)
![Konu](/tpl/images/cats/es.png)
![Konu](/tpl/images/cats/istoriya.png)
History, 08.12.2021 20:10
![Konu](/tpl/images/cats/mat.png)
![Konu](/tpl/images/cats/himiya.png)
Chemistry, 08.12.2021 20:10
![Konu](/tpl/images/cats/mat.png)
![Konu](/tpl/images/cats/mat.png)