Engineering, 24.04.2021 01:10, 21cassitsh

Consider a circular cross-section which experiences an internal torsional load T=17 Nm, an internal bending moment M_y=24 Nm, and an internal shear force V= 10 kN. All loads act in the directions shown in the figure below. The cross-section has a diameter, d=69 mm.

Given these internal loads in the cross-section, calculate the stresses at point B.
Determine the normal stress, alphaB, and shear stress tauB, at point B in MPa

Ans: SigmaB = 0.7441, TauB = -28.7895
I need help getting to the answer.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Do you know the correct answer?

Consider a circular cross-section which experiences an internal torsional load T=17 Nm, an internal...