Engineering, 23.04.2021 20:50, tdahna0403

Water is flowing through a 12-cm-diameter pipe that consists of a 3-m-long vertical and 2-m- long horizontal section with a 90° elbow at the exit to force the water to be discharged
downward, as shown in Fig. 2b, in the vertical direction. Water discharges to atmospheric air at
a velocity of 4 m/s, and the mass of the pipe section when filled with water is 15 kg per meter
length. Determine the moment acting at the intersection of the vertical and horizontal sections of
the pipe (point A). What would your answer be if the flow were discharged upward instead of
downward?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Do you know the correct answer?

Water is flowing through a 12-cm-diameter pipe that consists of a 3-m-long vertical and 2-m- long...