Engineering
Engineering, 23.04.2021 16:00, mattwe4567893987654

Design a 4-basin chlorine disinfection system for a plant with a winter average flow of 10.5MGD and a summer average flow of 12.8MGD, using an 8-ft deep, serpentine-channel, chlorine gas disinfection, sulfur dioxide dechlorination, and reaeration before discharge. Use 6-channels per basin. 1. Based on a 90-minute winter contact time and a channel D:W = 1:1, determine: (a) Volume of each basin
(b) Surface area of each basin
(c) Channel width in each basin
(d) Total channel length in each basin
(e) What is the L:W each basin? Does it satisfy general geometry recommendations?
(f) Construction length of a basin
(g) Construction width of a basin

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, margaret1758
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Do you know the correct answer?
Design a 4-basin chlorine disinfection system for a plant with a winter average flow of 10.5MGD and...

Questions in other subjects:

Konu
Mathematics, 14.02.2021 15:20