Engineering, 22.04.2021 20:50, hwest98

The 150 mm thick wall of a gas fired furnace is constructed of fireclay brick (k=1.5 W/m. K) , tho=2600 kg/m3, and cp=1000 J/kg. K ) and is well insulated at its outer surface. The wall is at a uniform initial temperature of 20 degree C, when the burners are fired and inner surface is exposed to products of combustion for which T infinity=950 degree C and h=100 W/ m2.K. (A) How long does it take for the outer surface of the wall to reach a temperature of 750 degree C?
(B) plot the temperature distribution in the wall at the foregoing time.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Do you know the correct answer?

The 150 mm thick wall of a gas fired furnace is constructed of fireclay brick (k=1.5 W/m. K) , tho=2...