Engineering, 22.04.2021 04:00, itziabejar

Estimate the overall liquid-side mass transfer coefficient at 25celsuis for o2 from h2o intonair. For oxygen in air the diffusion coefficient is 0.23cm/s. For oxygen in water the diffusion coefficient is 2.1×10^-3cm/s. Henry's constant is 769L. atm/mol. Use the two film theory and assume the film thickness is 0.01cm for both gas and liquid phase. Which phase had more resistance for the overall mass transfer

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Do you know the correct answer?

Estimate the overall liquid-side mass transfer coefficient at 25celsuis for o2 from h2o intonair. Fo...