A tubular condenser containing 120 ¾-in. BWG 16 copper tube that are each 8.00ft long, condenses 22,100 lbm/hr of saturated steam at 120.0 °C using 870.0 gal/min of cooling water. The measured inlet and exit water temperatures are 20.0 °C and 46.0°C, respectively. You may assume that the wall temperature, T", is equal to the mean bulk temperature of the cooling water. a)How complete is the heat balance

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.