Engineering, 19.04.2021 15:30, volleyballfun24

A cylindrical water tank is 20.0 m tall, open to the atmosphere at the top, and is filled to the top. It is noticed that a small hole has occurred in the side at a point 12.5 m below the water level and that water is flowing out at the volume flow rate of 2.10 10-3 m3/min. Determine the following. (a) the speed in m/s at which water is ejected from the hole m/s (b) the diameter of the hole in mm mm

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, salazjlove

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

continue

Engineering, 04.07.2019 18:20, luisgonz5050

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

continue

Engineering, 06.07.2019 02:30, chickennbutt0730

On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)

Answers: 2

continue

Do you know the correct answer?

A cylindrical water tank is 20.0 m tall, open to the atmosphere at the top, and is filled to the top...