Engineering, 15.04.2021 21:20, xoxonaynay
The pressure drop in a venturi meter (Fig. P3.128) varies only with the fl uid density, pipe approach velocity, and diameter ratio of the meter. A model venturi meter tested in water at 20 8 C shows a 5-kPa drop when the approach velocity is 4 m/s. A geometrically similar prototype meter is used to measure gasoline at 20 8 C and a fl ow rate of 9 m 3 /min. If the prototype pressure gage is most accurate at 15 kPa, what should the upstream pipe diameter be
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:10, heidiburgos1own6c0
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Do you know the correct answer?
The pressure drop in a venturi meter (Fig. P3.128) varies only with the fl uid density, pipe approac...
Questions in other subjects:
Computers and Technology, 24.12.2019 18:31
