Engineering, 13.04.2021 20:10, vkyles84

Design a parallel resonant circuit for an AM radio receiver. The inductance can vary to adjust the resonant frequency in order to cover the full AM broadcast band, which is from 530 to 1610 kHz. The circuit bandwidth must be at least 20 kHz in order to reproduce the full station signal, but not too much more than that in order to filter out adjacent stations. The resistor value is 33 kΩ. The inductance varies with a fixed inductor Lfixed in series with a variable inductor that has a range from zero to Lvar in order to cover the broadcast band. Using standard 20% tolerance commercial values, obtain the value of the capacitor and the two inductors. Finally, determine the quality factor range of the circuit from the low end to the high end of the broadcast band. Given: w = 2pif, w0 = 1/sqrt(LC), B = w0/Q, Q = w0RC

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 18:10, oshawn108

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k

Answers: 2

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 19:20, rosemary909

In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.

Answers: 3

continue

Do you know the correct answer?

Design a parallel resonant circuit for an AM radio receiver. The inductance can vary to adjust the r...