Engineering, 13.04.2021 07:30, alex12354

Match the following parts of a crane with the part name by selecting the
corresponding number.
Boom head or tip section
Auxiliary or
whip line
Headache bal
or overhaul ball
S.
Deflector (lder) sheaves
2
Main hoist line
1.
3
>
e the
- Main hoist line or falls
2.
Q
Audiary hoist line
5
3.
Boom head tip or
sheaves
nust
4.
Counterweight
Boom pendants (stays)
5.
Load block or main
hook block
Bridie
his
Upperrors or superstructure
refers to the entire crane
structure above the
Swing circle
6.
Live Mast
Boom hoistreering
Boom stops or backstops
7.
Hool, base, but or boom foot section
erect
Lattice boom insert or
sections
Swing circle, ring goar, role path or tumtable
001000
Carrier
Center pin, cater of rotation is of rotation

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, abdirahmansoloman

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

continue

Engineering, 04.07.2019 19:10, brid7931

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

continue

Engineering, 04.07.2019 19:20, amcd2002

A21-tooth spur pinion mates with a 28-tooth gear. the diametral pitch is 3 teeth/in and the pressure angle is 20°, find the following values: the addendum, dedendum, circular pitch, tooth thickness, and base circle diameters.

Answers: 2

continue

Do you know the correct answer?

Match the following parts of a crane with the part name by selecting the
corresponding number...