Engineering
Engineering, 09.04.2021 02:00, drakkeo

An unloaded helicopter of mass 16000 kg hovers at sea level while it is being loaded. In the unloaded hover mode, the blades rotate at 550 rpm. The horizontal blades above the helicopter cause a 16-m-diameter air mass to move downward at an average velocity proportional to the overhead blade rotational velocity (rpm). A load of 11000 kg is loaded onto the helicopter, and the helicopter slowly rises. a. Determine the volumetric airflow rate downdraft that the helicopter generates during unloaded hover and the required power input.
b. Determine the rpm of the helicopter blades to hover with the 14,000 kg load and the required power input.
Take the density of atmospheric air to be 1.18 kg/m3. Assume air approaches the blades from the top through a large area with negligible velocity and air is forced by the blades to move down with a uniform velocity through an imaginary cylinder whose base is the blade span area.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
image
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
image
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
image
Engineering, 04.07.2019 19:10, brid7931
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
Do you know the correct answer?
An unloaded helicopter of mass 16000 kg hovers at sea level while it is being loaded. In the unloade...

Questions in other subjects:

Konu
Mathematics, 28.02.2021 08:00
Konu
Geography, 28.02.2021 08:00
Konu
Mathematics, 28.02.2021 08:00