Engineering, 09.04.2021 01:00, Ksedro1998
The 1D3D cyclone was built and initial tests indicated that the collection efficiency is 96% for the particulate matter in the drier exhaust. The plant wants to dry another grain that gives off more particulate matter. They tell you that the dust loading rate will be 10.0 g/m^3 and the dust density will be 1.4 kg/m^3.
Required:
Set up the equation(s) to find the expected collection efficiency of the 1D3D cyclone with the higher dust loading. All other conditions remain the same.
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, juansoto227711
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:10, mamasbug4285
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 18:20, rbgrh9465
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
Do you know the correct answer?
The 1D3D cyclone was built and initial tests indicated that the collection efficiency is 96% for the...
Questions in other subjects:
Mathematics, 24.03.2020 20:09
Mathematics, 24.03.2020 20:09
History, 24.03.2020 20:09
History, 24.03.2020 20:09
Mathematics, 24.03.2020 20:09
