Engineering
Engineering, 07.04.2021 20:40, ooferson

Problem 1 On a 20°C sunny day with no wind speed, and an air density of 1.2 kg/m², a 1500 kg vehicle travels
along an asphalt roadway with a 6° grade at 100 km/h and a rolling resistance coefficient of 0.013.
The vehicle center of gravity is located 0.6 m from the ground in the center of the 2.5 m wheelbase
with 0.66 m wheels and has a frontal area of 2.05 m² and a drag coefficient of 0.32.
Calculate the aerodynamic, grading, and rolling resistance.
Problem 2
After some engine and transmission performance upgrades, the same vehicle is taken to a test track
to find out the new vehicle top speed. The upgrades have increased engine torque to 450 Nm and
engine horsepower to 300 kW and an overall powertrain efficiency of 88%. After the upgrades, the
minimum gear ratio of the transmission is 0.9, and the differential gear ratio is 3.21.
Calculate the maximum speed of the vehicle
Problem 3
The same vehicle travels along a level asphalt roadway at 100 km/h, with a coefficient of road adhe-
sion of 0.72, and encounters a large obstacle 50 m ahead and needs to stop to avoid striking the
obstacle.
Calculate the braking force at the front and rear wheels that is required to stop just before the
obstacle.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
image
Engineering, 04.07.2019 18:10, colin774
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
image
Engineering, 04.07.2019 18:20, krojas015
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
image
Engineering, 04.07.2019 19:10, LadyHolmes67
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Do you know the correct answer?
Problem 1 On a 20°C sunny day with no wind speed, and an air density of 1.2 kg/m², a 1500 kg vehicl...

Questions in other subjects:

Konu
English, 05.02.2021 18:10
Konu
English, 05.02.2021 18:10
Konu
Mathematics, 05.02.2021 18:10
Konu
Mathematics, 05.02.2021 18:10