An ideal gas is contained in a closed assembly with an initial pressure and temperature of 250kN/m² and 115°C respectively. If the final volume of the system is increased 1.5 times and
the temperature drops to 35°C, identify the final pressure of the gas.​

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?