Engineering, 07.04.2021 07:30, kenzielema12
A coil having a resistance of 5ohms and an inductance of 0.02H is arranged in parallel with another coil having a resistance of 1ohm and inductance of 0.08H. calculate the current through the combination and the power absorbed when the voltage of 100v at 50Hz is applied. Also estimate the resistance of a single coil which will take the same current at the same power factor. draw circuit diagrams where necessary
Answers: 2
Engineering, 04.07.2019 12:10, Ryantimes2
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
A coil having a resistance of 5ohms and an inductance of 0.02H is arranged in parallel with another...
Biology, 14.01.2020 01:31
Physics, 14.01.2020 01:31
Computers and Technology, 14.01.2020 01:31