Engineering, 06.04.2021 03:10, helpmeplz11239

A class of 63 students has two hourly exams and a final exam. The regression model was constructed to predict the poerfomance on the final exam based on the results of the two hour exams
(x, and x2). The following are some quantities of interest:
0.9129168 -0.00981502 -0.00071092
(x'x)-' -0.00981502 1.497241e-04 -4.15806 - 05
(-0.00071092 -4.158056 - 05 5.81235e - 05
4871.0
(X'y) = 426011.0
367576.5
Assume y'y = {y} = 411, 222.7041.
63
(a) Find a 95% confidence interval for the coefficient of hourly 1 test.
Round your answers to three decimal places (e. g. 98.765).
sBis i
(b) Find a 95% confidence interval for the mean final grade for students who score 80 on the first test and 85 on the second.
Round your answers to two decimal places (e. g. 98.76).
IS Hylxo
< i

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:10, lillygrl100

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

Do you know the correct answer?

A class of 63 students has two hourly exams and a final exam. The regression model was constructed...