Engineering, 06.04.2021 02:40, ShlomoShekelstein
Consider a mild steel specimen with yield strength of 43.5 ksi and Young's modulus of 29,000 ksi. It is stretched up to a point where the strain in the specimen is 0.2% (or 0.002). If the specimen is unloaded (i. e. load reduces to zero), the residual strain (or permanent set) is: 0.05% 0.1% 0% 0.2%
Answers: 3
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30Β°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 19:10, gabigalvis1091
What is the main objective of using reheat rankine cycle?
Answers: 3
Engineering, 06.07.2019 02:30, Nonniel0v3
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
Consider a mild steel specimen with yield strength of 43.5 ksi and Young's modulus of 29,000 ksi. It...
Mathematics, 04.11.2020 23:30
English, 04.11.2020 23:30
English, 04.11.2020 23:30
Mathematics, 04.11.2020 23:30
History, 04.11.2020 23:30
Social Studies, 04.11.2020 23:30
Mathematics, 04.11.2020 23:30