Engineering
Engineering, 06.04.2021 02:40, jasonr182017

You are considering the purchase of a temperature measurement package, consisting of both a temperature sensor and signal conditioningelectronics, whose output voltage(in Volts)inthe Laplace domain, Y(s), is related to temperature(in Celsius)in the Laplace domain, (s), by: Y(s)=0.1s+1(s)Suppose you apply a 5-degree step change in temperature to this sensor, meaning that (s)=5/s.1.Write an expression for Y(s)in the Laplace domain (1 point). 2.Solve for the output voltage, y(t), in the time domain, assumingan initial temperature of zero and a corresponding initial output voltage of zero(1 point). 3.What is the steady-state output voltage? (1 point)4.How long does it take for the output voltage to reach 90% of its steady-state value?(1 point)

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
image
Engineering, 04.07.2019 18:10, mamasbug4285
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Do you know the correct answer?
You are considering the purchase of a temperature measurement package, consisting of both a temperat...

Questions in other subjects:

Konu
Mathematics, 18.03.2021 01:40
Konu
Mathematics, 18.03.2021 01:40
Konu
Mathematics, 18.03.2021 01:40