Engineering
Engineering, 05.04.2021 14:00, trent1002brown

The oblique reservoir manometer shown in the figure consists of a 35 mm diameter vertical reservoir cylinder and a 5 mm diameter tube inclined at an upward angle of 15 °. If the vertical reservoir cylinder is inclined to the atmosphere, the tube opens to the air channel. The manometer is filled with liquid with a specific gravity of 0.785. What will be the pressure in the air duct if the manometer liquid in the inclined tube rises 50 mm upwards?


The oblique reservoir manometer shown in the figure consists of a 35 mm diameter vertical reservoir

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
image
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
image
Engineering, 04.07.2019 18:10, siri5645
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
image
Engineering, 04.07.2019 18:10, aliopqwas
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Do you know the correct answer?
The oblique reservoir manometer shown in the figure consists of a 35 mm diameter vertical reservoir...

Questions in other subjects:

Konu
History, 21.04.2020 08:48