Engineering, 30.03.2021 18:10, stormserena

A polyamide A-3 flat belt 6 in wide is used to transmit 15 hp under light shock con-ditions where Ks = 1.25, and a factor of safety equal to or greater than 1.1 is appro-priate. The pulley rotational axes are parallel and in the horizontal plane. The shafts loose side is on top. The driven pulley is 18 in in diameter. See Fig. 17-10. The fac-tor of safety is for unquantifiable exigencies. (a) Estimate the centrifugal tension Fc and the torque T.
(b) Estimate the allowable F1, F2, Fi and allowable power Ha.
(c) Estimate the factor of safety. Is it satisfactory ?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:20, dlr1628

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

Do you know the correct answer?

A polyamide A-3 flat belt 6 in wide is used to transmit 15 hp under light shock con-ditions where Ks...