Engineering, 22.03.2021 21:30, pinkpearl2022
Two identical 4 in. major-diameter power screws (single-thread) with modified square threads are used to raise and lower an 70 ton sluice gate on a dam. Quality of construction and maintenance (including lubrication) are good, resulting in an estimated friction coefficient of only 0.1 for the screws. The thrust collars for the power screws have a mean diameter of 5.50 in and an effective friction coefficient of 0.24. Assuming that, because of gate friction, each screw must provide a lifting force of 36.4 tons, what power is required to drive each screw when the gate is being raised at the rate of 3 ft/min
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, bryneosburn
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10, siri5645
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
Do you know the correct answer?
Two identical 4 in. major-diameter power screws (single-thread) with modified square threads are use...
Questions in other subjects:
Social Studies, 27.07.2019 06:00
