Engineering
Engineering, 19.03.2021 18:20, ayeequeen6392

Oxygen consumed by a living organism in aerobic reactions is used in adding mass to the organism and/or the production of chemicals and carbon dioxide. Since we may not know the molecular compositions of all species in such a reaction, it is common to define the ratio of moles of CO2 produced per mole of O2 consumed as the respiratory quotient, RQ, where RQ= n_co2 / n_O2 (nO2 / no2)

Since it generally is impossible to predict values of RQ, they must be determined from operating data. Mammalian cells are used in a bioreactor to convert glucose to glutamic acid by the reaction

C6​H12​O6​+ aNH3​+ bO2​→ pC5​H9​NO4​+ qCO2​+ rH2​O

The feed to the bioreactor comprises 1 .00 x 10^2 mol C6H12O2/ day, 1. 20 × 10^2 mol NH3/day, and 1. 10x 10^2 mol O2/day. Data on the system show that RQ= 0.45 mol CO2 produced/mol O2 consumed.

Required:
a. Determine the five stoichiometric coefficients and the limiting reactant.
b. Assuming that the limiting reactant is consumed completely, calculate the molar and mass flow rates of all species leaving the reactor and the fractional conversions of the non-limiting reactants.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
image
Engineering, 04.07.2019 19:10, nayi2002
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
image
Engineering, 04.07.2019 19:20, mercedesamatap21hx0
To design a steam turbine to produce 12,000 hp power. a engineer comsiders using a steady state stean low st 1160fr and engineer considers using a steady state steam flow at 1160°r and 450 psia to drive this steam turbine. the exhaust of the steam is cooled by the lake (vacuum). heat losing to the surroundings is measured at a rate of 555.55 btu/s. (a) sketch the system with the given conditions. (b) neglecting kinetic and potential energy changes from inlet to exit, determine the volumetric flow rate of the steam at the inlet, (ft'/hr). must clearly show unit conversions at crtical terms.
Answers: 1
image
Engineering, 04.07.2019 19:20, brae72
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
Do you know the correct answer?
Oxygen consumed by a living organism in aerobic reactions is used in adding mass to the organism and...

Questions in other subjects:

Konu
History, 19.11.2020 01:20
Konu
Mathematics, 19.11.2020 01:20