Engineering
Engineering, 19.03.2021 18:10, kmh05

Analysis of Vitamin C Commercial vitamin C containing 100 mg per tablet can be used. Perform the following analysis three times, and find the mean value (and relative standard deviation) for the number of milligrams of vitamin C per tablet. 1. Dissolve two tablets in 60 mL of 0.3 M H2SO4, using a glass rod to help break the solid. (Some solid binding material will not dissolve.) 2. Add 2 g of solid KI and 50.00 mL of standard KIO3. Then titrate with standard thiosulfate as above. Add 2 mL of starch indicator just before the end point. How do I determine the ascorbic acid content of the vitamin C tablet?

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, selenamr
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed. gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
image
Engineering, 04.07.2019 18:20, miguel454545
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
image
Engineering, 04.07.2019 18:20, jessie8022
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
image
Engineering, 04.07.2019 19:10, ndaha
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
Do you know the correct answer?
Analysis of Vitamin C Commercial vitamin C containing 100 mg per tablet can be used. Perform the fol...

Questions in other subjects:

Konu
Health, 08.06.2021 06:30
Konu
Mathematics, 08.06.2021 06:30
Konu
Mathematics, 08.06.2021 06:30
Konu
Mathematics, 08.06.2021 06:30