Engineering, 19.03.2021 06:00, kaseykrueger47
A metal plate 200 mm in length, 150 mm in width, and 20 mm in depth is to be machined by orthogonal cutting using a tool of width 10 mm and a depth of cut of 0.5 mm. Estimate the minimum time required to reduce the depth of the plate to 10 mm if the tool moves at 50 mm per second. Note that the width and length of the plate must remain the same.
Answers: 3
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Do you know the correct answer?
A metal plate 200 mm in length, 150 mm in width, and 20 mm in depth is to be machined by orthogonal...
Questions in other subjects:
Mathematics, 07.03.2020 06:24
