Engineering
Engineering, 18.03.2021 03:40, ManBun99

HELP PLEASE NEED ANSWER Choose the type of alternative energy that you will advocate for. You may choose either a wind farm with an attached plant for generating electricity, or a biomass farm with an attached processing plant for generating biofuel. Choose a location where your farm will be built. You must specify a state in the United States and the approximate location within that state. If you wish, you can choose an actual city or town within your location, or you can invent a hypothetical community.
Design a minimum of 10 slides that you will use in your presentation. The slides can be either created on separate pieces of 8.5" x 11" white paper, or they can be designed using computer software such as PowerPoint. The slides should address why the community was targeted, the science behind the technology, and the benefits to the community; they should also address any concerns that you anticipate the community will have. You don’t have to use references outside of this lesson, but you may do so if you wish. Be sure to cite any outside references on your slides.
Give a 15-minute oral presentation using your slides. Imagine that you are addressing the community in a town hall-style meeting and using your slides to illustrate your points. If you can’t give your presentation to your instructor in person, you may film your presentation.

Upload your slides and your 15-minute presentation that reveal your pitch for alternative energy.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
image
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
image
Engineering, 04.07.2019 18:20, maciemarklin79981
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
image
Engineering, 04.07.2019 19:10, netflixacc0107
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
Do you know the correct answer?
HELP PLEASE NEED ANSWER Choose the type of alternative energy that you will advocate for. You may ch...

Questions in other subjects:

Konu
History, 08.07.2019 17:50