Engineering, 18.03.2021 03:30, anika420

Choose the type of alternative energy that you will advocate for. You may choose either a wind farm with an attached plant for generating electricity, or a biomass farm with an attached processing plant for generating biofuel. Choose a location where your farm will be built. You must specify a state in the United States and the approximate location within that state. If you wish, you can choose an actual city or town within your location, or you can invent a hypothetical community.
Design a minimum of 10 slides that you will use in your presentation. The slides can be either created on separate pieces of 8.5" x 11" white paper, or they can be designed using computer software such as PowerPoint. The slides should address why the community was targeted, the science behind the technology, and the benefits to the community; they should also address any concerns that you anticipate the community will have. You don’t have to use references outside of this lesson, but you may do so if you wish. Be sure to cite any outside references on your slides.
Give a 15-minute oral presentation using your slides. Imagine that you are addressing the community in a town hall-style meeting and using your slides to illustrate your points. If you can’t give your presentation to your instructor in person, you may film your presentation.

Upload your slides and your 15-minute presentation that reveal your pitch for alternative energy.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, BardiFan

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Do you know the correct answer?

Choose the type of alternative energy that you will advocate for. You may choose either a wind farm...