Engineering
Engineering, 18.03.2021 01:50, kiingbr335yoqzaxs

Steam is generated in the boiler of a cogeneration plant at 10 MPa and 450 degC at a steady rate of 5 kg/s. In normal operation, steam expands in a turbine to a pressure of 0.5 MPa, and is then routed to the process heater, where it supplies the process heat. Steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. In this mode, no steam passes through the condenser, which operates at 20 kPa. Determine: a) the power produced and the rate at which process heat is supplied in this mode, and b) the power produced and the rate of process heat supplied if only 60% of the steam is routed to the process heater and the remainder is expanded to the condenser pressure.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 08:10, doggo242
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
image
Engineering, 04.07.2019 18:10, tjeffers90028
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Do you know the correct answer?
Steam is generated in the boiler of a cogeneration plant at 10 MPa and 450 degC at a steady rate of...

Questions in other subjects:

Konu
Chemistry, 26.05.2020 21:00
Konu
Mathematics, 26.05.2020 21:00
Konu
Mathematics, 26.05.2020 21:00