Engineering, 18.03.2021 01:40, lexybellx3

The bridge rectifier in the circuit provides reverse polarity protection for the embedded system. Assume the embedded system needs 3.3 V to operate and all the diodes are Schottky diodes. Assume the embedded system draws an average of 10 mA. How much power is dissipated by the bridge rectifier if the battery voltage is large enough to power the system

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Do you know the correct answer?

The bridge rectifier in the circuit provides reverse polarity protection for the embedded system. As...