Engineering, 18.03.2021 01:30, h0ttmomma92002

A segment of interstate highway requires the construction of an embankment of 350,000 yd3. The embankment fill is to be compacted to a minimum of 90% of the Modified Proctor maximum dry density. A source of suitable borrow material has been located for construction of the embankment and has the following properties: Unit weight 112 pcf Moisture content 9% Swell factor 0.81 Modified Proctor optimum moisture content 12% Modified Proctor maximum dry density 121 pcf Assuming each truck has a maximum capacity of 5.5 yd3, what is the minimum number of truckloads of soil required to construct the embankment using soil from the borrow pit

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

Do you know the correct answer?

A segment of interstate highway requires the construction of an embankment of 350,000 yd3. The emban...