Engineering
Engineering, 18.03.2021 01:20, ambercuevas2707

A proposed embankment fill requires 7100 ft of compacted soil. The void ratio of the compacted fill is specified as 0.5. Four borrow pits are available as below, which list the respective void ratios of the soil and the cost per cubic feet for moving the soil to the proposed construction site. Make the necessary calculations to determine the total cost for each pit. Assume the specific gravity of soil solids, Gs to be the same at all pits. 1. Calculate the volume of solid (Vs) = ft3 Borrow Pit A: void ratio = 1.05 and the unit cost = $ 6 /ft3
2. Calculate the total cost to pay to Pit A = Borrow Pit B: void ratio = 0.61 and the unit cost = $ 7 /ft3
3. Calculate the total cost to pay to Pit B = Borrow Pit C: void ratio = 0.81 and the unit cost = $ 4 /ft3
4. Calculate the total cost to pay to Pit C = Borrow Pit D: void ratio = 0.73 and the unit cost = $6 /ft3
5. Calculate the total cost to pay to Pit D =

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, Talos02
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
image
Engineering, 04.07.2019 18:20, kendrawalraven
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
image
Engineering, 04.07.2019 19:20, amandaaarmentaa
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
image
Engineering, 04.07.2019 19:20, natalie2sheffield
Acompressor compresses a gas, a pump compresses a liquid. for a given pressure ratio, why does it take more work to compress a gas in a compressor than a liquid in a pump? a)- for a given pressure ratio the average specific volume for a gas is much higher than the average specific volume for a liquid. b)- there is no difference. the only difference is the amount of heat generated (not work) c)- for a given pressure ratio the average volurge for a gas is much higher than the average volume for a liquid. d)-there is no difference
Answers: 3
Do you know the correct answer?
A proposed embankment fill requires 7100 ft of compacted soil. The void ratio of the compacted fill...

Questions in other subjects:

Konu
Mathematics, 05.05.2020 15:35
Konu
Mathematics, 05.05.2020 15:35