Engineering, 18.03.2021 01:20, willowcollins1256

For a bolted assembly, the stiffness of each bolt is kb = 2 Mlbf/in and the stiffness of the members is km = 14 Mlbf/in per bolt. The joint is subject to occasional disassembly for maintenance and should be preloaded accordingly. A fluctuating external load is applied to the entire joint with Pmax = 80 kips and Pmin = 20 kips. Assume the load is equally distributed to all the bolts. It has been determined to use 1/2 in-13 UNC grade. 1. Determine the minimum number of bolts necessary to avoid yielding of the bolts.
2. Determine the minimum number of bolts necessary to avoid joint seperation.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, wyattlb97

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

continue

Do you know the correct answer?

For a bolted assembly, the stiffness of each bolt is kb = 2 Mlbf/in and the stiffness of the members...