Engineering, 12.03.2021 21:30, jholland03

1) Given: 8 oz = 1 cup, 1 gallon = 4 quarts, 2 cups = 1 pint, 1.04 lbs-water = 1 pint, 2 pints = 1 quart, 1 liter = 1.05669 quarts, 1 ml = 1 cm3, 1000 ml = 1 liter, 2.205 lb = 1kg, 1 ton = 2000 lb, 60 sec = 1 min, 1 hr = 60 min, 1 meter = 100 cm, 10 mm = 1 cm, 5280 ft = 1 mile, 12 in = 1ft, 36 in = 1 yard, 2.54 cm = 1 in, 1.15078 mile = 1 nautical mile, 1 km = 1000 meter, 1000 grams = 1 kg, a. How much does 1 gallon of water weigh in pounds and in kg?

b. How much does 1 liter of water weigh in pounds and in kg?

c. How many cups in a gallon?

d. How many ounces in a gallon?

e. How many kilometers is 100 nautical miles?

f. How many tons does a cubic meter of water weigh?

g. How many gallons of water in a cubic of foot of water?

h. How many pounds does a cubic foot of water weigh?

i. How many meters per second is 80 miles per hr?

j. How many feet per second is 500 miles per hr?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

Do you know the correct answer?

1) Given: 8 oz = 1 cup, 1 gallon = 4 quarts, 2 cups = 1 pint, 1.04 lbs-water = 1 pint, 2 pints = 1 q...