Engineering, 12.03.2021 15:00, koryn4880

A steel tape with a cross sectional area of 0.04 cm2 and weighing 1 kg has a length of 30.01 m between the zero and the 30m marks, when supported throughout at 22 degree C and subject to a tension of 6 kg. This tape is used to measure a distance along a horizontal ground and is supported throughout during the measurement. The tension applied is 13 kg. The temperature of the tape is 6 degree C. The measured slope distance is recorded as 370m. What is the corrected horizontal distance? (Use K = 1.15 Times 10^-5/degree C per m and E = 2.1 Times 10^6 kg/cm^2)

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, meganwintergirl

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Do you know the correct answer?

A steel tape with a cross sectional area of 0.04 cm2 and weighing 1 kg has a length of 30.01 m betwe...