Engineering, 12.03.2021 15:00, cdavis379
A 2-shell passes and 4-tube passes heat exchanger is used to heat glycerin from 20\degc to 50\degc by hot water, which enters the thin-walled 2-cm-diameter tubes at 80\degc and leaves at 40\degc . The total length of the tubes in the heat exchanger is 60 m. The convection heat transfer coefficient is 25 W/m2.K on the glycerin (shell) side and 160 W/m2.K on the water (tube) side. Determine the rate of heat transfer in the heat exchanger (a) before any fouling and (b) after fouling with a fouling factor of 0.0006 m2.K/W occurs on the outer surfaces of the tubes.
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:20, DroctorWellsfan
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20, xcapo1x
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Engineering, 04.07.2019 19:10, pjgolden04
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
Do you know the correct answer?
A 2-shell passes and 4-tube passes heat exchanger is used to heat glycerin from 20\degc to 50\degc b...
Questions in other subjects:
Mathematics, 14.04.2021 22:10
Mathematics, 14.04.2021 22:10
History, 14.04.2021 22:10
Mathematics, 14.04.2021 22:10
