Engineering
Engineering, 09.03.2021 02:00, tlmarvel

Plot the following void ratio versus pressure data. Evaluate the compression index (Cc) and the recompression index (CR). (b) Determine the pre-consolidation stress (following the Casagrande re-construction method (1936) described in section 8.5.2). (c) Assume that this material exists in a 6-m thick layer. The effective vertical stress at the middle of this layer is initially 130 kPa and an additional 175 kPa of external vertical stress is then applied from an above structure. What is the ultimate settlement that would be expected from the placement of this structure. (d) What would the settlement resulting from this same structure be if the over-consolidation ratio of the clay were initially 1. Again, assume the layer is 6 m thick, the initial effective stress is 130 kPa (at mid-depth) and an additional 175 kPa of external vertical stress is applied from the structure

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, jadeochoa4466
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
image
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
image
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
image
Engineering, 04.07.2019 18:20, RiverH246
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Do you know the correct answer?
Plot the following void ratio versus pressure data. Evaluate the compression index (Cc) and the reco...

Questions in other subjects:

Konu
Biology, 21.10.2019 20:10