Engineering, 04.03.2021 20:10, imthebestatcod

Let x[n] represent the number of new cell phones ordered externally (from outside the factory) on day n at the ACME Phone Manufacturing Com- pany and let q[n] represent the total number of or- ders (internal and extermal) received on day n. . It takes 2 days to manufacture a cell phone from the day the internal or external) order is received, and let w[n] be the number of completed phones on day n. Before shipping, 10% of the completed phones are held for one more day of extensive testing (the remaining phones are available for shipping). Of the tested phones, 95% pass the test and are available for shipping at the end of the day of testing, but the other 5% that fail the test are discarded for recy- cling. An internal order is made to replace the failed phones in the manufacturing process. Let y[n] be the total number of phones available to ship on day n. Specify a flow diagram and a difference equation in standard form) that describe together the number of phones available to ship as a function of the number of external orders received.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, BardiFan

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

continue

Engineering, 04.07.2019 18:20, xcapo1x

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

continue

Engineering, 04.07.2019 19:20, sashajayne8260

Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.

Answers: 3

continue

Engineering, 06.07.2019 03:20, shelbellingswo

Aload of 10kn is to be suddenly applied to the free end of a vertical rod of length 500 mm, the upper end being rigidly fixed. 190 mechanical science what should the diameter of the rod be if the maximum stress in the rod is not to exceed 100 mpa? the tensile modulus of the rod is 205 gpa.

Answers: 2

continue

Do you know the correct answer?

Let x[n] represent the number of new cell phones ordered externally (from outside the factory) on da...