Arrange the lines of pseudocode so that, when the LeftBumper is pressed, the robot goes at half speed for 20 feet (which takes 10 seconds) and then stops. Reorder answers 1.} // end repeat Reorder answers 2.} // end if Reorder answers 3.Repeat forever { Reorder answers 4.Drive forward Reorder answers 5.Wait 10 seconds Reorder answers 6.If LeftBumper pressed then { Reorder answers 7.Set drive velocity to 50% Reorder answers 8.Stop driving

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.