Engineering, 02.03.2021 18:10, thegent1859
Un eslabón AB, cuyo ancho es b = 50 mm y su grosor t = 6 mm, se emplea para soportar el extremo de una viga horizontal. Si se sabe que el esfuerzo normal promedio en el eslabón es de -140 MPa y que el esfuerzo cortante promedio en cada uno de los pasadores es de 80 MPa, determine: a) El diámetro (d) de los pasadores. B) El esfuerzo promedio de apoyo en el eslabón.
Answers: 1
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Un eslabón AB, cuyo ancho es b = 50 mm y su grosor t = 6 mm, se emplea para soportar el extremo de u...
Business, 14.02.2021 23:30
Business, 14.02.2021 23:30
Mathematics, 14.02.2021 23:30
Mathematics, 14.02.2021 23:30
Mathematics, 14.02.2021 23:30