Engineering, 25.02.2021 22:40, bferguson8956

Hi please help will give brainliest if you don't report ░░░░░▐▀█▀▌░░░░▀█▄░░░
░░░░░▐█▄█▌░░░░░░▀█▄░░
░░░░░░▀▄▀░░░▄▄▄▄▄▀▀░░
░░░░▄▄▄██▀▀▀▀░░░░░░░
░░░█▀▄▄▄█░▀▀░ ░ ░ ░░▄▀▀▀▀▄░░▄▄
░░░▌░▄▄▄▐▌▀▀▀ ░ ░ ░█░░░░░░▀▀░░█░░░░░░▄░▄
▄░▐░░░▄▄░█░▀▀ ░ ░ ░█░║░░░░██░████████████
▀█▌░░░▄░▀█▀░▀ ░ ░ ░█░░░░░░▄▄░░█░░░░░░▀░▀
░░░░░░░▀███▀█░▄░░░▀▄▄▄▄▀░░▀▀
░░░░░░███████ ]▄▄▄▄▄▄▄▄
▂▄▅█████████▅▄▃▂
[███████████████████]. /▌
◥⊙▲⊙▲⊙▲⊙▲⊙▲⊙▲⊙◤
this is tank bob he plays guitar and blows stuff up

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:20, esmemaluma00

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

continue

Engineering, 04.07.2019 18:20, cxttiemsp021

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

continue

Engineering, 04.07.2019 18:20, AnonymousLizard52303

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

continue

Do you know the correct answer?

Hi please help will give brainliest if you don't report ░░░░░▐▀█▀▌░░░░▀█▄░░░
░░░░░▐█▄█▌░░░░░░...