HELLO, be nice spread love... DO NOT HATE ON OTHERS ░░░░░▐▀█▀▌░░░░▀█▄░░░ ░░░░░▐█▄█▌░░░░░░▀█▄░░ ░░░░░░▀▄▀░░░▄▄▄▄▄▀▀░░ ░░░░▄▄▄██▀▀▀▀░░░░░░ ░░░█▀▄▄▄█░▀▀░░ ░░░▌░▄▄▄▐▌▀▀▀░░ This is Bob ▄░▐░░░▄▄░█░▀▀ ░░ ▀█▌░░░▄░▀█▀░▀ ░░ Copy and paste him so he can take over ░░░░░░░▀███▀█░▄░░ ░░░░░░▐▌▀▄▀▄▀▐▄░░ ░░░░░░▐▀░░░░░░▐▌░░ ░░░░░░█░░░░░░░░█░ COPY AND PASTE LETS DEFEATS MOTERATER

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?