Engineering, 18.02.2021 20:50, tvrgrvJfbhh3881

Three storms each of 6-h duration and having rainfall excess values of 3.0, 2.0 and 1.5 inch respectively occur successively. The sequence of rainfall events follows: first: 3.0 inch; second: 2.0 inch and third: 1.5 inch. The 6-h unit hydrograph for the catchment is provided, calculate the resulting DRH. If the baseflow is 10m3/s, then derive the streamflow hydrograph. Time (h) 0 3 6 9 12 15 18 24 30 36 42 48 54 60 69
UH ordinates (m3 /s) 0 25 50 85 125 160 185 160 110 60 36 25 16 8 0

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:20, CelesteN64

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

continue

Engineering, 04.07.2019 18:20, cxttiemsp021

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

continue

Do you know the correct answer?

Three storms each of 6-h duration and having rainfall excess values of 3.0, 2.0 and 1.5 inch respect...