Engineering, 16.02.2021 17:30, natalie2sheffield

A company makes two kinds of leather belts A & B, Belt A is of high quality and belt B is of low quality. The respective profit are

Rs. 4 and Rs. 3 per belt. The production of each of type A belt

requires twice as much time as of belt of type B, and if all belts were

of B type, the company would make 1000 belts per day. The supply

of leather is sufficient for only 800 belts per day (for A & B type

combined). Belt A requires a fancy buckle and only 400 of these are

available per day. There are 700 buckles a day available for belt B.

What should be the daily production of each type of belt? Formulate

this problem as an LP model and solve it using the simplex method.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 18:10, nandalabella06

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

Do you know the correct answer?

A company makes two kinds of leather belts A & B, Belt A is of high quality and belt B is of lo...