Engineering, 16.02.2021 05:40, alexandria3498

**Can someone please help me solve these problems step by step, thank you! 1. If a 12-inch diameter driving Gear A has 100 tooth which turns CCW with a torque of 200 ft-lb and 100 rpm is meshed with Gear B, 25 tooth, turn along with Gear C, 50 tooth as they are a compound gear and Gear D, 150 tooth meshed with C.

-->sketch and annotate the gear train.

-->what direction does gear ratio B, C, and D turn?

-->what is the gear ratio for B, C, and D?

-->what is the angular velocity for gears B, C, and D?

-->what is the torque for gears B, C, and D?

-->what is the diameter of gears B, C, and D?

2. In a pulley system, pulley A is moving 1000 rpm and has a diameter of 18inches. There are two pulleys with different sizes, B moving ot 1575 rpm and C moving at 1850 rpm attached on a single axle.

-->sketch and annote the pulley system.

-->what is the diameter of pulley B and pulley C?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, namira16

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

continue

Do you know the correct answer?

**Can someone please help me solve these problems step by step, thank you! 1. If a 12-inch diameter...